Fishing chains have three specifications: short link chian, middle link chain and long link chain. Different types of fishing chains have different features.

Studless Fishing Anchor Chain are 62.5% load verified at break, very durable and able to withstand extreme and harsh weather use, it is also corrosion-resistant, ideal for use in saltwater environments. There are Short Link, Mid Link and Long Link to choose from.

Stud link anchor chains are a type of heavy-duty chain commonly used for anchoring and mooring vessels. They have a central stud in each link that helps to prevent kinking, deformation, and fouling. These chains are known for their strength and are often preferred for large vessels and applications where significant loads are involved.

The dual shank anchor features two parallel shanks that work together to embed and hold in various seabed conditions. This design provides higher holding power than traditional anchors, especially in soft ground and mud, and is commonly used in aquaculture and swing moorings.

ADA aqua drag anchor is improved version base on generation of aqua-moor DSA anchor, yet provides better performance.

A Sand Anchor has is a conventional anchor with solid construction to withstand high load.It has high holding power and weight ratio and very suitable for seabed of sand and mix Soil.

Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.

Mooring shackles are manufactured with alloy steel by following ISO9001 Quality Control System. With our years know-how on forging, heat treatment and hot dip galvanized, it is ensured the mooring shackle avoid any Hydrogen Embrittle-ment and offer a longer fatigue life of safe performance compared to EN13889 requirement and safety.

Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.

A mooring ring is a forged or welded circular steel fitting mounted on docks, piers or decks to give mooring lines a secure, permanent anchor point. SMEOCEAN rings are drop-forged from Q345B alloy steel or 316L stainless, hot-dip galvanized ≥80 µm, rated 2–200 t, and certified to IACS / ABS / CCS / DNV. Magnetic-particle inspected and salt-spray tested, they deliver long-term, maintenance-free holding power for vessels, floating platforms and workboats.

Mooring plate is one critical component in the mooring system. We deliver robust and solid mooring plates which are designed to withstand the forces they are exposed to.

A HDG tube wire rope thimble is a type of thimble, a component used to reinforce and protect the eye (loop) of a wire rope, specifically one made of steel tube and treated with a hot-dip galvanization (HDG) process for corrosion resistance. These thimbles are commonly used in various rigging and lifting applications.

Heavy-duty synthetic rope thimbles are designed with a bend radius to maintain rope strength, and four loop "retainers" prevent the rope from jumping out of the pin.

A K3B thimble is a specific type of thimble, commonly used with wire rope, that features a reinforced design and hot dip galvanized (HDG) finish for enhanced durability and corrosion resistance. The "K3B" designation refers to the specific type, and the "HDG" indicates that it's been hot dip galvanized, which involves coating the steel with a layer of zinc for protection.

Rope K3 Thimble is used for aquaculture mooring, where the surface needs to be heat-treated to protect wire, fibre or synthetic ropes.

SINOSTAR's G403 Forged Chain Swivel meets the requirements of federal specification RR-C-271D, with a safety factor of up to 5:1, ensuring reliability under extreme working conditions.

A US G401 chain swivel is a type of swivel link used in chain rigging, specifically designed to allow for rotation and prevent twisting. These swivels are commonly made of high tensile steel, often hot-dipped galvanized for corrosion resistance.

Kelly’s Eye G80 is constructed from high-quality steel, ensuring it is strong enough to withstand even the most demanding lifting tasks.

Made in China G Hook G80 with Hight Tensile Steel and Drop Frozen process, accept customization.

G412 Eye Swivels Steel Forged refers to a type of swivel made from forged steel, specifically designed with an eye on each end, and meeting the G412 standard. These swivels are commonly used in marine and industrial rigging for connecting ropes, chains, and other rigging hardware.

A G402 Eye Swivel is a piece of rigging hardware, specifically an eye-to-eye swivel, that is made from forged steel and has a hot-dip galvanized finish.

Galvanized Steel Springboard,Aquaculture mooring,Galvanized Scaffolding Work Platform,Galvanized Scaffolding Work Platform

PP rope is widely used as a mooring line, it has the same strength either under wet conditions or normal.

A buoy floats in water and acts as a locator or a warn ing point for ships on high seas.Buoys are bright (fluorescent) and made of PVC tubing.

The experience in handcrafted lobster pot and other traps make sure the customer always receive the best goods in term of cost and quality. OEM and Bespoke design is offered to individual requirements.