Stud link anchor chains are a type of heavy-duty chain commonly used for anchoring and mooring vessels. They have a central stud in each link that helps to prevent kinking, deformation, and fouling. These chains are known for their strength and are often preferred for large vessels and applications where significant loads are involved.
Fishing chains have three specifications: short link chian, middle link chain and long link chain. Different types of fishing chains have different features.
Studless Fishing Anchor Chain are 62.5% load verified at break, very durable and able to withstand extreme and harsh weather use, it is also corrosion-resistant, ideal for use in saltwater environments. There are Short Link, Mid Link and Long Link to choose from.
Stud link anchor chains are a type of heavy-duty chain commonly used for anchoring and mooring vessels. They have a central stud in each link that helps to prevent kinking, deformation, and fouling. These chains are known for their strength and are often preferred for large vessels and applications where significant loads are involved.
The dual shank anchor features two parallel shanks that work together to embed and hold in various seabed conditions. This design provides higher holding power than traditional anchors, especially in soft ground and mud, and is commonly used in aquaculture and swing moorings.
ADA aqua drag anchor is improved version base on generation of aqua-moor DSA anchor, yet provides better performance.
A Sand Anchor has is a conventional anchor with solid construction to withstand high load.It has high holding power and weight ratio and very suitable for seabed of sand and mix Soil.
Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.
Mooring shackles are manufactured with alloy steel by following ISO9001 Quality Control System. With our years know-how on forging, heat treatment and hot dip galvanized, it is ensured the mooring shackle avoid any Hydrogen Embrittle-ment and offer a longer fatigue life of safe performance compared to EN13889 requirement and safety.
AM3 is a designation for a grade of stud-link anchor chain, specifically referring to a high-strength steel chain used for ship anchoring and mooring. These chains are designed for durability and reliability in demanding marine applications, often used on large vessels or in harsh environmental conditions.
Stud link anchor chain AM2 is a specific type of anchor chain widely used in marine applications. It's characterized by having a stud (a crossbar or bar) within each link, adding strength and preventing kinking or twisting. AM2 is a designation within the marine industry for a specific grade of this chain, indicating its strength and material properties.
Anchor Chain for marine farm mooring system, with diameter 16mm to 50mm, most used in European fish farming industry.
SMEOCEAN specializes in supplying various industrial chains, including high-strength alloy steel industrial lifting chains specifically designed for vertical lifting and heavy object suspension. These chains are widely used in cranes, electric hoists, manual hoists, and other lifting equipment.
G80 high-strength lifting chains are the industry standard for slings and chain cranes, available in sizes from 6mm to 32mm. Strictly adhering to EN818-2 standards, these chains are exported globally in bulk and are highly trusted for their quality.
G80 Steel Lifting Chain based on EN818-2 standard The G80 steel lifting chain of EN818-2 standard is a high-strength chain widely used in the field of hoisting and lifting. It is usually made of high-strength alloy steel materials, such as alloy steel containing chromium, nickel, molybdenum or 20Mn2, etc. It has excellent strength, toughness and wear resistance, can withstand large loads and extend service life.
The G100 lifting chain (CHAIN-G10) is made of special alloy steel, quenched and tempered, and conforms to EN818-8 standard (Grade 100). Compared to the common G80 chain, it increases the working load by approximately 25% at the same diameter and has better fatigue resistance. The chain has a safety factor of 4:1 and factory test certificates and classification society certifications are available.
Mining round link chain is a type of steel chain commonly used in high-performance conveyor systems within underground mining operations. These chains are designed to transmit high tensile forces and are specifically engineered for the harsh conditions found in mining environments.
A G80 clevis shortening clutch (also known as a grade 80 chain adjuster or clevis chain clutch) is used to quickly adjust the working length of a G80 alloy lifting chain. This forged alloy steel component allows you to shorten or lengthen the chain without breaking the connection.
Swivel eye bolt lifting capacity options available range from 70kg on a tiny M5 metric thread, which then incrementally increases primarily based on thread size, up to M150 on a single bolt rated to 125 tonnes, right up to a huge 250 tonnes each, which uses 12 x M48 bolts.
A DIN 580 Lifting Eye Bolt is a type of threaded bolt with a loop or eye at one end, designed for lifting and load handling purposes. These bolts adhere to the DIN 580 standard, which specifies their dimensions and properties.
A G80 Master Link Forged Chain Sling is a crucial component in lifting and rigging systems, specifically designed for connecting chain slings to lifting equipment. It's a robust, closed-loop device, typically made of forged alloy steel, used to create a secure connection point for one or more chain legs in a sling assembly. The "G80" designation refers to the grade of the steel, indicating its strength and lifting capacity.
Grade 8 Master Link Assembly is also called G80 Quad Link Assemblies. The sub-assemblies are made from alloy steel for chain slings or wire rope slings with 3 or 4 legs. The subrings will have an engineered flat upon request to avoid mismatching. The master link assembly is suitable for G80 EN818-2 lifting chains.
A G80 connecting link, also known as a hammerlock, is a type of coupling link used in industrial lifting and rigging applications. It is designed to connect Grade 80 chain slings to hooks, master links, or other chain components. The G80 designation indicates that the link is made from Grade 80 alloy steel, a material known for its high strength and toughness.
A rotary kiln chain is a specialized type of chain designed for use in rotary kilns, which are cylindrical vessels used for various industrial processes like cement production, lime calcination, and waste incineration.
High strength mining chains are specialized chains designed for use in demanding mining environments, particularly in conveyors and other heavy-duty applications. They are typically made from high-quality steel alloys and are engineered for durability, abrasion resistance, and the ability to withstand heavy loads.
The Grade 30 (G30) proof coil chain is a type of low- to medium-strength chain commonly used in various applications, such as general-purpose lifting, towing, and securing.
316 stainless steel anchor chain is a type of anchor chain made from a high-grade stainless steel alloy, specifically AISI 316, known for its excellent resistance to corrosion, especially in marine environments. It's designed for use with windlasses and offers a rust-free solution for mooring, lifting, and securing.
Multi-leg alloy steel chain slings are lifting devices constructed from multiple alloy steel chains connected to a central master link, used to lift and move heavy loads. They offer stability and balance due to multiple pickup points on the load. These slings are particularly useful for handling loads exceeding 180,000 pounds and for applications requiring uniform load distribution.
