Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.

Mooring shackles are manufactured with alloy steel by following ISO9001 Quality Control System. With our years know-how on forging, heat treatment and hot dip galvanized, it is ensured the mooring shackle avoid any Hydrogen Embrittle-ment and offer a longer fatigue life of safe performance compared to EN13889 requirement and safety.

Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.

A mooring ring is a forged or welded circular steel fitting mounted on docks, piers or decks to give mooring lines a secure, permanent anchor point. SMEOCEAN rings are drop-forged from Q345B alloy steel or 316L stainless, hot-dip galvanized ≥80 µm, rated 2–200 t, and certified to IACS / ABS / CCS / DNV. Magnetic-particle inspected and salt-spray tested, they deliver long-term, maintenance-free holding power for vessels, floating platforms and workboats.

Aquaculture Mooring Plate / Four-eyes Plate/Connection Plate / Mooring Wheels / Mooring Plate The four-eye plate is used for the connection between anchor chains and can connect three anchor chains at the same time. The body is integrally forged with special materials which improves the tensile strength.It is widely used for the connection and matching of aquaculture moorings.

Mooring plate is one critical component in the mooring system. We deliver robust and solid mooring plates which are designed to withstand the forces they are exposed to.

G414 Wire Rope Thimble is used for aquaculture mooring, where the surface needs to be heat-treated to protect wire, fibre or synthetic ropes.

Kelly’s Eye G80 is constructed from high-quality steel, ensuring it is strong enough to withstand even the most demanding lifting tasks.

Made in China G Hook G80 with Hight Tensile Steel and Drop Frozen process, accept customization.

A HDG tube wire rope thimble is a type of thimble, a component used to reinforce and protect the eye (loop) of a wire rope, specifically one made of steel tube and treated with a hot-dip galvanization (HDG) process for corrosion resistance. These thimbles are commonly used in various rigging and lifting applications.

"Rock Pin T Type / Eye Type" likely refers to pitons, which are metal spikes used in climbing, and the "T" and "eye" refer to the two primary shapes available. The T-type piton has a T-shaped head, while the eye-type piton has an eye hole or ring at the end, to which a carabiner is attached to create an anchor point.

Heavy-duty synthetic rope thimbles are designed with a bend radius to maintain rope strength, and four loop "retainers" prevent the rope from jumping out of the pin.

A K2B thimble is a specific type of thimble, commonly used with wire rope, that features a reinforced design and hot dip galvanized (HDG) finish for enhanced durability and corrosion resistance. The "K3B" designation refers to the specific type, and the "HDG" indicates that it's been hot dip galvanized, which involves coating the steel with a layer of zinc for protection.

Rope K3 Thimble is used for aquaculture mooring, where the surface needs to be heat-treated to protect wire, fibre or synthetic ropes.

We are able to produce OEM casting cast iron, ductile iron, and steel counterweights for various applications and mass. Our casting counterweight products are guarantee high quality and competitive prices, meeting international standards.

We are able to produce OEM casting cast iron, ductile iron, and steel counterweights for various applications and mass. Our casting counterweight products are guarantee high quality and competitive prices, meeting international standards.