Fishing chains have three specifications: short link chian, middle link chain and long link chain. Different types of fishing chains have different features.

Studless Fishing Anchor Chain are 62.5% load verified at break, very durable and able to withstand extreme and harsh weather use, it is also corrosion-resistant, ideal for use in saltwater environments. There are Short Link, Mid Link and Long Link to choose from.

Stud link anchor chains are a type of heavy-duty chain commonly used for anchoring and mooring vessels. They have a central stud in each link that helps to prevent kinking, deformation, and fouling. These chains are known for their strength and are often preferred for large vessels and applications where significant loads are involved.

The dual shank anchor features two parallel shanks that work together to embed and hold in various seabed conditions. This design provides higher holding power than traditional anchors, especially in soft ground and mud, and is commonly used in aquaculture and swing moorings.

ADA aqua drag anchor is improved version base on generation of aqua-moor DSA anchor, yet provides better performance.

A Sand Anchor has is a conventional anchor with solid construction to withstand high load.It has high holding power and weight ratio and very suitable for seabed of sand and mix Soil.

Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.

Mooring shackles are manufactured with alloy steel by following ISO9001 Quality Control System. With our years know-how on forging, heat treatment and hot dip galvanized, it is ensured the mooring shackle avoid any Hydrogen Embrittle-ment and offer a longer fatigue life of safe performance compared to EN13889 requirement and safety.

Mooring connection plates are manufactured using alloy grade material and followed by full heat treatment process.The durability ensures that the plates can withstand exposure to saltwater, reducing maintenance needs and extending the lifespan of the aquaculture setup.

A mooring ring is a forged or welded circular steel fitting mounted on docks, piers or decks to give mooring lines a secure, permanent anchor point. SMEOCEAN rings are drop-forged from Q345B alloy steel or 316L stainless, hot-dip galvanized ≥80 µm, rated 2–200 t, and certified to IACS / ABS / CCS / DNV. Magnetic-particle inspected and salt-spray tested, they deliver long-term, maintenance-free holding power for vessels, floating platforms and workboats.

Mooring plate is one critical component in the mooring system. We deliver robust and solid mooring plates which are designed to withstand the forces they are exposed to.

A HDG tube wire rope thimble is a type of thimble, a component used to reinforce and protect the eye (loop) of a wire rope, specifically one made of steel tube and treated with a hot-dip galvanization (HDG) process for corrosion resistance. These thimbles are commonly used in various rigging and lifting applications.

Heavy-duty synthetic rope thimbles are designed with a bend radius to maintain rope strength, and four loop "retainers" prevent the rope from jumping out of the pin.

A K3B thimble is a specific type of thimble, commonly used with wire rope, that features a reinforced design and hot dip galvanized (HDG) finish for enhanced durability and corrosion resistance. The "K3B" designation refers to the specific type, and the "HDG" indicates that it's been hot dip galvanized, which involves coating the steel with a layer of zinc for protection.

Rope K3 Thimble is used for aquaculture mooring, where the surface needs to be heat-treated to protect wire, fibre or synthetic ropes.

SINOSTAR's G403 Forged Chain Swivel meets the requirements of federal specification RR-C-271D, with a safety factor of up to 5:1, ensuring reliability under extreme working conditions.

A US G401 chain swivel is a type of swivel link used in chain rigging, specifically designed to allow for rotation and prevent twisting. These swivels are commonly made of high tensile steel, often hot-dipped galvanized for corrosion resistance.

Kelly’s Eye G80 is constructed from high-quality steel, ensuring it is strong enough to withstand even the most demanding lifting tasks.

Made in China G Hook G80 with Hight Tensile Steel and Drop Frozen process, accept customization.

G412 Eye Swivels Steel Forged refers to a type of swivel made from forged steel, specifically designed with an eye on each end, and meeting the G412 standard. These swivels are commonly used in marine and industrial rigging for connecting ropes, chains, and other rigging hardware.

A G402 Eye Swivel is a piece of rigging hardware, specifically an eye-to-eye swivel, that is made from forged steel and has a hot-dip galvanized finish.

Galvanized Steel Springboard,Aquaculture mooring,Galvanized Scaffolding Work Platform,Galvanized Scaffolding Work Platform

Sinostar marine equipment Co., Ltd can provide Rock Pin T-shape/eye shape for aquaculture mooring.

PP rope is widely used as a mooring line, it has the same strength either under wet conditions or normal.

A buoy floats in water and acts as a locator or a warn ing point for ships on high seas.Buoys are bright (fluorescent) and made of PVC tubing.

The experience in handcrafted lobster pot and other traps make sure the customer always receive the best goods in term of cost and quality. OEM and Bespoke design is offered to individual requirements. 

The 12.5mm Stud Link Anchor Chain is a heavy-duty marine chain primarily used in ship anchoring and mooring systems. Standard length (short link): typically supplied in 27.5-meter (15 fathom) lengths, connectable using Kenter shackles.

AM3 is a designation for a grade of stud-link anchor chain, specifically referring to a high-strength steel chain used for ship anchoring and mooring. These chains are designed for durability and reliability in demanding marine applications, often used on large vessels or in harsh environmental conditions.

Stud link anchor chain AM2 is a specific type of anchor chain widely used in marine applications. It's characterized by having a stud (a crossbar or bar) within each link, adding strength and preventing kinking or twisting. AM2 is a designation within the marine industry for a specific grade of this chain, indicating its strength and material properties. 

Anchor Chain for marine farm mooring system, with diameter 16mm to 50mm, most used in European fish farming industry.

An Anchor Shackle Type D End Shackle is a specific type of shackle used in marine applications, particularly for connecting anchor chains. It's a D-shaped fitting with a removable pin, designed to safely connect the anchor's standard shackle to the chain or to a rope with a thimble.

The anchor chain jioning shackle, also known as the anchor shackle or anchor chain shackle, is a connecting device used to connect the segments of anchor chain and is a key component in the maritime and offshore industries. It is an important part of the anchor system, ensuring that the anchor is firmly fixed to the anchor chain.

The pear shaped chain shackle is used for drag chain installations. It is a Grade 3 shackle and is generally used to link R3 class anchor chains. The standard use of the pear shaped chain link is to connect a normal chain link to another normal chain link with a larger diameter. In some cases, if the classification society approves, you can use it to connect the normal chain link of the anchor chain to the anchor shackle.

Swivel shackle is a marine accessory, specifically a chain link, which is a chain with a fixed structure, which is composed of 5 parts: End Link, Enlarged Link, Swivel Shackle, Enlarged Link, Common Link. And it is used to make the anchor chain avoid twisting during lifting anchors.

A Kenter link shackle, or Kenter joining shackle, is a type of detachable link used to connect two lengths of stud-link chain, typically in the marine industry. It's composed of two halves that are connected by a center stud and a locking pin, often a tapered pin with a lead plug. This type of shackle is used to join anchor and mooring chains.

Forelock shackle is designed for use within stud link anchor chain as a means of connecting the stud link anchor chain to an associated fitting, termination point or in a navigation buoy mooring bridle system.

A "Chain tensioner Dogbone Shackle Double type" is a type of chain tensioner that uses a shackle-like mechanism to adjust the tension of a chain, often found in applications like tire chains or for joining heavy chains. It's characterized by a "dogbone" or "U-shaped" design, with two ends that can be opened and closed to grip the chain. The "double type" refers to a version with two of these shackle mechanisms, allowing for more adjustment and control over chain tension.

A Marine Anchor Chain Swivel is a piece of marine hardware that connects the anchor to the anchor chain, preventing the chain from twisting or kinking as the boat moves or the anchor is deployed and retrieved. This device allows the anchor to be retrieved and stowed smoothly, reducing wear and tear on the chain, deck gear, and bow roller.

LTM H-type joining shackle is a kind of high-strength connectors used in mooring engineering field., usually made of alloy steel or high-strength steel, with high tensile strength, wear-resistant, corrosion-resistant and other characteristics, suitable for heavy loads, harsh working conditions.

LTM END JOINING SHACKLE is a special end connection shackle for offshore mooring chain. It is usually made of alloy steel or high-strength steel. It has the characteristics of high tensile strength, wear resistance and corrosion resistance. It is suitable for heavy loads and harsh working conditions.

Buoy shackle is one type of shackles which is used to connect anchor chains to the mooring buoys. There are two types of mooring buoy shackles: type A and type B.

A marine swivel shackle, specifically a "Type B," is a connecting link used in marine applications to connect the anchor chain to the anchor. It functions as both a swivel and a shackle, allowing the chain to rotate freely to prevent twisting and damage. Type B shackles are designed to connect directly to the anchor shackle and anchor shank.

A marine swivel shackle, specifically a "Type A," is a connector used in anchoring systems to join the anchor to the chain, allowing for free rotation and preventing twisting or kinking of the chain. This type of shackle is designed to be compact and minimizes the space between the anchor and the chain.

The Quick Release Buoys Hook can be operated hydraulically by a single push-on-a-button. This allows the hooks to be released from a distance, individually or simultaneously in case of an emergency with a PDA or from ashore with a control panel.

A "J Type Chain Chase Hook" or "J Chain Chaser" is a specialized tool used to recover anchors and mooring lines from the seabed, particularly when the anchor has become embedded or the buoy and pennant have broken. It's designed with a J-shaped hook that can be used to grasp the anchor chain and pull the anchor out. The chaser material is not as hard as the chain and wire to minimize wear on the anchor chain.

A marine chain grapnel hook is a tool used to recover lost or detached anchor chains or anchors that have fallen to the seabed. It's designed with flukes that grip the chain links, allowing the hook to be pulled back to the surface, retrieving the anchor and chain.

Buoy shackle is one type of shackles which is used to connect anchor chains to the mooring buoys. There are two types of mooring buoy shackles: type A and type B.

Buoy shackle is one type of shackles which is used to connect anchor chains to the mooring buoys. There are two types of mooring buoy shackles: type A and type B.

AC-14 anchor is a stockless HHP anchor with a wide anchor crown, thick and long flukes, and longitudinal ribs.

The Stevpris MK5 HHP (High Holding Power) anchor is a type of stockless anchor, known for its deep penetration capabilities and ability to perform well in hard soils. It is a modification of the original Stevpris anchor, with features like a stronger construction, shark teeth, and sharp fluke edges. The Stevshark MK5 is an adapted version, also designed for strong holding power and commonly used in permanent moorings and reaction anchors.

HHP TW pool anchor is a super stockless high holding power anchor, whose coefficient of holding power is 4 times higher than that of the ordinary stockless anchor, having sharp and smooth flukes.

The AC-14 SB HHP Casting Anchor is a high-holding-power anchor, specifically designed for marine applications. It's a stockless anchor with a design that provides excellent weight-to-performance ratios and can be used in various seabed conditions. 

A Marine Hall stockless anchor is a type of marine anchor made from cast steel, commonly used on ships. It's designed to be a versatile anchor, suitable for various sea bottom conditions, and comes in different types (A, B, C) primarily differentiated by the length of the anchor shank. These anchors are known for their rugged construction and ability to hold in sand and mud, making them a popular choice for ships.

A ship Spek anchor, also known as a stockless anchor, is a common type of anchor used in commercial shipping and cruise vessels. It is designed with a compact, stockless design for easy handling and deployment, especially in shallow waters, and is known for its good holding power.

An HHP (High Holding Power) Type N Pool Anchor is a type of ship anchor, specifically designed for mooring vessels and offering high holding power. It is a stockless anchor, meaning it doesn't have a shank and stock like some other anchor types. These anchors are known for their ability to penetrate and securely grip various seabed types, making them suitable for a wide range of marine applications.

The marine JIS stockless anchor is a special type of stockless anchor designed according to the Japanese Industrial Standard (JIS). It is a widely used conventional anchor type, the JIS stockless anchor has a strong holding power and compact storage, making it an ideal choice for fishing boats and other ships, providing a reliable mooring solution.

An HHP (High Holding Power) Matrosov anchor is a type of marine anchor known for its excellent holding capacity in various seabeds, often exceeding that of conventional anchors of the same weight. It is a stockless anchor, meaning its shank can be folded or removed to save deck space. The anchor features a specific fluke design with large stabilizers to prevent it from getting stuck, and it's used by various vessels like oil tankers and container ships.

The Admiralty Anchor stands as a paragon of maritime engineering, embodying centuries of nautical innovation.

A "Marine 316 Stainless Steel HHP Pool N Anchor Boat" refers to a type of boat anchor specifically designed for marine applications, made from high-quality, corrosion-resistant materials. Here's a breakdown of what each part means.

Delta flipper anchor is a superior high holding power anchor with its easy handling and rapid penetration in different soil conditions and is well known worldwide. The HHP anchor has an open construction for smooth penetration in different kinds of soil and no rotation, which means no decrease of holding capacity and no dragging of the anchor.

HHP Danforth anchor is one of the most popular and lightweight anchors available, making it an excellent choice for small boats.

A 316 stainless steel anchor bow roller is a marine component designed to facilitate the smooth and efficient deployment and retrieval of a boat's anchor. It's typically made from 316 stainless steel, which offers excellent corrosion resistance, making it ideal for the harsh marine environment. The roller guides the anchor chain or rode over the bow, preventing damage to the boat's hull and deck.

A 316 stainless steel folding grapnel anchor is a small, lightweight anchor, often used on small boats and watercraft like dinghies, kayaks, and fishing boats. It's made from high-quality 316 stainless steel, a type known for its durability and resistance to corrosion, especially in saltwater. The anchor's "grapnel" design means it has multiple arms or flukes that dig into the seabed, providing a strong hold. The folding feature allows for compact storage when not in use.

316 stainless steel Delta anchors are marine-grade anchors known for their exceptional holding power and corrosion resistance. They are made from AISI 316 stainless steel, a premium grade considered the best in class for marine applications due to its durability and resistance to corrosion in harsh conditions.

Polishing a stainless steel 316 Danforth anchor improves its corrosion resistance and makes it easier to clean and maintain. A polished surface reduces the accumulation of deposits and rust, extending the anchor's lifespan. The polishing process removes imperfections and creates a smooth, shiny finish.

A 316 stainless steel Bruce anchor is a type of marine anchor made from a premium grade of stainless steel, known for its high corrosion resistance, especially in saltwater. Bruce anchors are effective in various seabed conditions and are popular for their ease of setting and re-setting.

A panama chock is a special type of hawse hole at a vessel's bow and designed as per the mooring requirements set by Panama Canal Authority.

ISO13795 Double Bitt Bollard is also called ISO13795 Deck Bollard, which is a mooring and towing fitting based on ISO standards, designed and manufactured to install on ships for protecting mooring and towing ropes.

DIN81902 Roller Fairlead is a common marine mooring and towing equipment. It is made of 4 rollers and is divided into 2 vertical rollers and 2 horizontal rollers.

The foundation of the warping roller shall be determined by the manufacturer in accordance with the standard of ISO13755. The roller fairlead is made from steel casting having a yield point of not less than 205N/mm2 or steel plates having a yield point of not less than 235 N/mm2 and the Axl is made from weldable steel casting having a yield point of not less than 350N/mm2 or equivalent.

We are able to produce OEM casting cast iron, ductile iron, and steel counterweights for various applications and mass. Our casting counterweight products are guarantee high quality and competitive prices, meeting international standards.

Application:JIS F2015-1987 bar type chain stopper is made of cast steel. It is a device used for ship mooring to prevent the anchor chain slipping out, according to JIS F2015 standard.

T Head Type Dock Bollard T Head bollard also can be called Tee head dock mooring bollard. The upon the side of the dock bollard is T head type, which can be different models according to the design of the dock.

The NS2589 bulwark chock is made of cast steel, and the surface is cleaned to SA2.5 in accordance with Swedish standard SIS 05 59 00, and is coated with a rust-proof primer. Therefore, the surface is very smooth, and with no burr or sharp edge, which helps to reduce the friction of mooring ropes.

The ISO 13728 Panama Chock Type A is a robust steel fitting designed for safe and efficient mooring line handling on the deck of large ships. Manufactured from high-quality cast steel, it provides a designated pathway for mooring lines, ensuring smooth operation.

For Chain Wheel For Hawse Pipe, everyone has different special concerns about it, and what we do is to maximize the product requirements of each customer.

NS2587 Bulwark Mounted Mooring Chock is a special type of hawse hole at a vessel’s bow, which is designed for temporary mooring. NS means Norsk standard or Norwegian Standard, a standard as JIS, DIN, GB, etc. This standard has four kinds of chocks NS2587.

NS2585 warping roller is the same as the GB/T 10105-88 fairlead. It is cast by the finest quality marine mild carbon steel for added durability. All surfaces in contact with the ropes shall be free from surface roughness or irregularities likely to cause damage to the ropes by abrasion. It has a high breaking load of a tightwire. The compact design, precision machined smooth surface and easily removable shafts ensure the good wear and corrosion resistance of the fairlead.

A DIN 81906 warping roller, also known as a fairlead roller, is a marine device used to guide mooring ropes or cables on ships. It's designed to change the direction of the rope and facilitate secure docking or anchoring. The fairlead roller typically consists of a cast steel or cast iron roller mounted on a pedestal or directly on the deck.

An "Open Type Guide Roller," or more specifically, an "Open Type Roller Fairlead," is a device used in marine applications, particularly in mooring and docking, to guide ropes and lines. It consists of one or more rollers on a stand, with the space between the rollers and the stand open, allowing the rope to pass through.

The swivel head fairlead is the heavy-duty balanced anchor fairlead and is installed on the deck of ships. It is suitable for use in most deck-mounted or flange-mounted marine-duty applications, which can be manufactured with welded foundation or bolted foundation.

SMEOCEAN is a professional marine equipment supplier. All of our swivel fairleads can be custom-designed and approved by CCS, ABS, DNV, GL, BV, RINA, NK, etc.

Twin horn type bollard is one of the most commonly used type of dock bollard. Its’ special horn shape can help more effectively fasten the rope and avoid releasing. We can also supply other types of dock bollards: K head dock bollard, staghorn type bollard, T head dock bollard, J type dock bollard, R type dock bollard, single bitt bollard, etc.. If you are interested in our products, please contact us.

The bulwark towing chock also known as EU type towing chock is installed on the bulwark. The bulwark towing chock is the towing fittings applied for the towing purpose by towing lines.

Single Roller Fairlead with Socket is a heavy-duty piece of equipment designed for the harsh environment of boats and ships. It functions similarly to its land-based counterpart, guiding and supporting ropes, lines, and cables while they’re under tension.

Single Roller Fairlead with Socket is a heavy-duty piece of equipment designed for the harsh environment of boats and ships. It functions similarly to its land-based counterpart, guiding and supporting ropes, lines, and cables while they’re under tension.

Manhole Cover for Ships Type A is suitable for applications where frequent access is not required. It is ideal for inspection access to ship voids, bulkhead access, fuel and water tank access.

Swivel Head Anchor Fairlead, also know as balanced head swivel fairleads, a weld down or bolt down base are designed for option.

The roller fairlead is manufactured strictly according to the Japanese Standard JIS F 2026-1980. It is also known as universal fairlead with horizontal rollers and vertical rollers.

The chain stopper is an important mooring device to ensure the safety of the ship. The chain stopper is mainly used to carry the gravity and tension of the anchor and the anchor chain, and it can protect the unworking windlass. The chain stopper can be selected according to the chain diameter and the test load of the anchor chain.

Sinostar Marine is a professional marine equipment supplier. All of our swivel fairleads can be custom-designed and approved by CCS, ABS, DNV, GL, BV, RINA, NK, etc.

Boom chains are typically made of high-strength materials like alloy steel and can be several feet long, with "T" ends designed to pass through holes drilled in the logs. .

The G80 Lashing Chains with Ratchet Load Binder are designed for secure load management, particularly in heavy-duty transport applications.

Lashing chains and tensioners are components of cargo securing systems used in transportation to prevent cargo from shifting or moving during transit.

Lashing chains and tensioner are components of cargo securing systems used in transportation to prevent cargo from shifting or moving during transit.

Lashing chains and tensioners are components of cargo securing systems used in transportation to prevent cargo from shifting or moving during transit.

Trailer horse for securing of trailers during shipment on Ro- Ro vessel, with rubber or wood pads on top to prevent the trailer from scratch.

An L150 lever type load binder with hook is a device used to secure loads, typically on trucks or flatbeds, using a lever mechanism to tighten a chain.

The long link lashing Chains with hook for Tensile with good wear charcteristics ideal for most binder applications are widely used in Transporting, Cargo Lashing, Binding, and Industry operations.

Marine D Rings are a versatile and essential piece of hardware for securing and attaching equipment on marine vessels,and are designed to provide a secure and reliable attachment point for various marine applications.

Ratchet Binders use ratcheting mechanism to create tension in the chain in order to safely secure the load.

The long link lashing Chains with hook for Tensile with good wear charcteristics ideal for most binder applications are widely used in Transporting, Cargo Lashing, Binding, and Industry operations.

Turnbuckles are used to take up slack and apply tension to a rigging assembly. They are designed to be loaded in straight pull, inline applications.

The long link lashing Chains with hook for Tensile with good wear charcteristics ideal for most binder applications are widely used in Transporting, Cargo Lashing, Binding, and Industry operations.

A G2130 Bolt Type Anchor Shackle is a type of shackle, specifically a bolt-type shackle, used in lifting and rigging applications where a high level of security and reliability is required. These shackles are designed with a bolt, nut, and cotter pin, which provides a more secure connection than traditional screw-pin shackles, especially in situations where the shackle might experience rotation or movement under load.

A G80 connecting link, also known as a hammerlock, is a type of coupling link used in industrial lifting and rigging applications. It is designed to connect Grade 80 chain slings to hooks, master links, or other chain components. The G80 designation indicates that the link is made from Grade 80 alloy steel, a material known for its high strength and toughness.

G210 Shackles,G210 Screw-Pin Shackle, also known as "D" shackles, are a type of lifting shackle characterized by their narrow, straight-sided bow (the U-shaped part) and a screw pin. They are designed for in-line connections and are suitable for applications where space is limited. The screw pin provides a secure and reliable connection, especially under heavy loads.

G209 shackle,G209 Screw Pin Bow Shackle manufactured by Crosby, is a high-performance, forged, screw-pin anchor shackle designed for heavy-duty lifting and rigging applications. They are known for their strength, corrosion resistance, and ability to meet or exceed industry standards like ASME B30 and DNV.

An Alloy G2150 bolt anchor shackle is a type of shackle, a U-shaped piece of metal used in lifting and rigging applications. It's specifically a bolt-type shackle, meaning it uses a bolt, nut, and cotter pin for securing the pin, offering enhanced security compared to screw pin or round pin shackles.

A G80 Master Link Forged Chain Sling is a crucial component in lifting and rigging systems, specifically designed for connecting chain slings to lifting equipment. It's a robust, closed-loop device, typically made of forged alloy steel, used to create a secure connection point for one or more chain legs in a sling assembly. The "G80" designation refers to the grade of the steel, indicating its strength and lifting capacity.

Grade 8 Master Link Assembly is also called G80 Quad Link Assemblies. The sub-assemblies are made from alloy steel for chain slings or wire rope slings with 3 or 4 legs. The subrings will have an engineered flat upon request to avoid mismatching. The master link assembly is suitable for G80 EN818-2 lifting chains.

Multi-leg alloy steel chain slings are lifting devices constructed from multiple alloy steel chains connected to a central master link, used to lift and move heavy loads. They offer stability and balance due to multiple pickup points on the load. These slings are particularly useful for handling loads exceeding 180,000 pounds and for applications requiring uniform load distribution.

A G80 Clevis Self Locking Hook is a type of lifting hook that utilizes a clevis attachment and a self-locking mechanism to ensure safe and secure lifting operations.

The open adapter link is specially designed for connecting bilateral chains, its appearance meets the standard requirements of MT/12718, and the high-alloy steel rich in Cr, Ni, Mo and other alloying elements and multiple heat treatment processes are selected in the manufacturing process to ensure the cooperation with the sprocket and safe operation, so as to ensure excellent mechanical properties and fatigue life.

A drop forged connecting/connector link for a mining chain is a metal component used to join segments of a mining chain together or to connect a chain to other equipment. These links are typically made from high-strength alloy steel and are designed for the demanding conditions of mining applications.

Flat serrated chain links, also known as flat connecting links or sawtooth chain links, are specialized connectors used to join flat or round link chains in mining applications.

G80 Clevis Grab Hooks are a type of rigging hardware used for overhead lifting applications, specifically with Grade 80 alloy chain or wire rope. These hooks are designed with a U-shaped "clevis" for easy attachment and are often used to shorten or hold a chain.

A G80 Eye Elephant Foot is a type of rigging hardware, specifically a lifting accessory used in industrial and commercial settings to secure loads to chains or cables.

A G80 clevis sling hook is a specific type of rigging hook used in lifting operations, particularly with chain slings. It's designed to attach to the chain sling directly, typically without any intermediate connectors, through a clevis-style attachment. G80 refers to the grade of the alloy steel used in its construction, ensuring high strength and durability. These hooks often feature a safety latch to prevent accidental detachment.

A G80 Clevis Elephant Foot is a type of forged alloy steel rigging hardware used for lashing cargo or vehicles to a vessel or container. It's also known as a jaw type elephant foot or elephant hook.

A DIN 580 Lifting Eye Bolt is a type of threaded bolt with a loop or eye at one end, designed for lifting and load handling purposes. These bolts adhere to the DIN 580 standard, which specifies their dimensions and properties.

In the context of mining, "Mining Scrapers conveyors forged" refers to the components of a scraper conveyor system, specifically the scrapers, chains, and connecting links, which are made using a forging process. Forging involves shaping metal under pressure, resulting in strong and durable components for heavy-duty applications like mining.

The Grade 80 Eye swivel self-locking hooks has a ball bearing swivel to allow the hook to swivel under load thus reducing the twist of a sling.

Vertical chain links, often referred to as vertical or "S-Forged" links, are a specific type of chain link used in mining equipment, particularly in chain conveyors. These links are characterized by their vertical orientation and are designed to be connected to other links, creating a flexible chain. They are typically forged from high-strength steel to withstand the heavy loads and harsh conditions of mining operations.

Vertical chain links, or vertical connecting links, are specialized components used in mining chains, specifically those designed for longwall systems and conveyor chains. They connect the chain's main links and ensure smooth, reliable operation under heavy loads.

Flat serrated chain links, also known as flat sawtooth links or flat type connectors, are used to connect mining chains, particularly those in conveyor systems. These links are designed to be easily assembled and disassembled, with different tooth shapes (sawtooth, ladder, arc) affecting the ease of connection and disconnection.

The Grade 30 (G30) proof coil chain is a type of low- to medium-strength chain commonly used in various applications, such as general-purpose lifting, towing, and securing.

Mining round link chain is a type of steel chain commonly used in high-performance conveyor systems within underground mining operations. These chains are designed to transmit high tensile forces and are specifically engineered for the harsh conditions found in mining environments.

Grade 70 chain is probably the most common drag chain grade in the flatbed transport industry. SINOSTAR has been selling G70 conveyor belt grab chain for a long time, and our chains will be stamped with Grade 70. G70 chain is usually coated with yellow chrome, and its load rating is about 20% higher than Grade 43, making it the strongest carbon steel chain available!

A rotary kiln chain is a specialized type of chain designed for use in rotary kilns, which are cylindrical vessels used for various industrial processes like cement production, lime calcination, and waste incineration.

G80 Steel Lifting Chain based on EN818-2 standard The G80 steel lifting chain of EN818-2 standard is a high-strength chain widely used in the field of hoisting and lifting. It is usually made of high-strength alloy steel materials, such as alloy steel containing chromium, nickel, molybdenum or 20Mn2, etc. It has excellent strength, toughness and wear resistance, can withstand large loads and extend service life.

High strength mining chains are specialized chains designed for use in demanding mining environments, particularly in conveyors and other heavy-duty applications. They are typically made from high-quality steel alloys and are engineered for durability, abrasion resistance, and the ability to withstand heavy loads.

316 stainless steel anchor chain is a type of anchor chain made from a high-grade stainless steel alloy, specifically AISI 316, known for its excellent resistance to corrosion, especially in marine environments. It's designed for use with windlasses and offers a rust-free solution for mooring, lifting, and securing.